For SERVO PLUS ploughs with hydraulic furrow width adjustment
Different working conditions and soil structures require different pulling forces. With hydraulic SERVO PLUS furrow width adjustment the plough is always precisely matched to the soil conditions.
Optimum tractor efficiency and ploughing results at all times.
All additional adjustments adapt to it correctly and automatically.
Optimum adaptation to tractor power, slopes and field shapes.
Easy ploughing of tight corners and headlands.
Optimum fence-line ploughing from three-furrow models and above.
Durable construction
Important pivot points have wear-resistant, replaceable spring steel bushes for the highest pressure demands, and the pivot points can be lubricated.
The furrow width is adjusted without the lower linkage wandering.
When you set the furrow width, there is then no need to adjust the front furrow width and pull line. The lower linkages remain parallel with no crabbing, essential for a straight furrow. Consistent landside pressure at all furrow widths.
Memory cylinder
Available as an option for Servo 35, 35 S and 45 S PLUS models with hydraulic furrow width adjustment. When the plough turns over, the memory cylinder reduces the furrow width to a minimum so that multiple furrow ploughs do not contact the ground when reversed.
Plough beam pivot cylinder
All Servo 45 M and SERVO 45 S models are available with beam pivot cylinders. This is standard on the 6-furrow models. The plough beam pivot cylinder cylinder is available as an option for the SERVO 35 and SERVO 35 S Standard and NOVA models. While being turned over, the plough beam is pivoted to maximise ground clearance. This system is impressive because it features such a small number of pivot points.
SERVO PLUS adjustment system with lever control and pivot point located away from the plough beam.
Smooth adjustment thanks to long adjusting lever.
Protects the parallel linkage and pivot points.
Clearly visible furrow width indicator.
The SERVO PLUS system is designed to allow hydraulic furrow width adjustment during ploughing. The hydraulic cylinder has a check valve so that the hoses are not under pressure during ploughing.